YUMI v2.0.6.8 2023

YUMI v2.0.6.8


This article shows you how to download and install the full version of YUMI v2.0.6.8 for free on PC. Follow the direct download link and instructions below for guidance on installing YUMI v2.0.6.8 on your computer.

Table of contents

  • About the software
  • YUMI v2.0.6.8 System Requirements
  • How to Download and Install YUMI v2.0.6.8
  • Required files

About the software

YUMI (Your Universal Multiboot Installer) can be used to create a multi-boot USB flash drive containing multiple operating systems, antivirus utilities, disc cloning, diagnostic tools and more. Aside from a few distributions, all files are stored within the Multiboot folder, making for a nicely organized Multiboot Drive that can still be used for other storage purposes. YUMI uses syslinux to boot extracted distributions stored on the USB device and reverts to using grub to Boot Multiple ISO files from USB, if necessary.

YUMI v2.0.6.8 System Requirements

  • Windows XP,Windows Vista (32 bit),Windows 7 (32 bit),Windows Vista (64 bit),Windows 7 (64 bit),Windows 8,Windows Server,windows 10

How to Download and Install YUMI v2.0.6.8

  1. Click on the download button(s) below and finish downloading the required files. This might take from a few minutes to a few hours, depending on your download speed.
  2. Extract the downloaded files. If you don’t know how to extract, see this article. The password to extract will always be: QWERTY!
  3. Run Setup.exe and install the software

Rufus v3.7.1576 2023

Rufus v3.7.1576


This article shows you how to download and install the full version of Rufus v3.7.1576 for free on PC. Follow the direct download link and instructions below for guidance on installing Rufus v3.7.1576 on your computer.

Table of contents

  • About the software
  • Rufus v3.7.1576 System Requirements
  • How to Download and Install Rufus v3.7.1576
  • Required files

About the software

Rufus is a free and open-source portable application for Microsoft Windows that can be used to format and create bootable USB flash drives or Live USBs. It is developed by Pete Batard of Akeo Consulting.

Rufus v3.7.1576 System Requirements

  • Apple (or PC) running Windows XP or later (preferably Windows 7+)
  • Rufus application
  • ISO (supported operating systems)
  • 8 GB USB flash drive (minimum recommended)

How to Download and Install Rufus v3.7.1576

  1. Click on the download button(s) below and finish downloading the required files. This might take from a few minutes to a few hours, depending on your download speed.
  2. Extract the downloaded files. If you don’t know how to extract, see this article. The password to extract will always be: QWERTY!
  3. Run Setup.exe and install the software

EM Client Pro 2023

EM Client Pro


This article shows you how to download and install the full version of EM Client Pro v9.1.2053 for free on PC. Follow the direct download link and instructions below for guidance on installing EM Client Pro v9.1.2053 on your computer.

Table of contents

  • About the software
  • EM Client Pro v9.1.2053 System Requirements
  • How to Download and Install EM Client Pro v9.1.2053
  • Required files

About the software

eM Client is a fully-featured email client for Windows and macOS with a clean and easy-to-use interface. eM Client also offers features for calendars, tasks, contacts, notes, and chat. eM Client is the best email client for mac and Windows.

Quickly access contextual information that will boost your productivity even more. The sidebar with communication history, attachment history, calendar, agenda, and chat will save you a lot of time.

eM Client allows seamless configuration and synchronization with Gmail and Google Apps. Full sync includes email, calendars, contacts and tasks. eM Client can replace MS Outlook, giving companies the ability to utilize Gmail’s full potential.

The main features of EM Client Pro are:

  • Superfast Search
  • Touch Support
  • Localization
  • Automatic back-up tool
  • Instant translation for all messages
  • Watch for replies and the Snooze function
  • Search within the attached documents
  • Templates, Signatures, and QuickTexts

EM Client Pro v9.1.2053 System Requirements

  • Windows 7 or higher (for XP compatible versions contact our support – although it is no longer a supported system, so we do not recommend its use).
  • 350 MB of free space for installation.
  • Minimum of 2 GB of RAM
  • 1.6 GHz CPU
  • Recommended for memory and processor – the more GB and GHz you have, the better :]

How to Download and Install EM Client Pro v9.1.2053

  1. Click on the download button(s) below and finish downloading the required files. This might take from a few minutes to a few hours, depending on your download speed.
  2. Extract the downloaded files. If you don’t know how to extract, see this article. The password to extract will always be: QWERTY!
  3. Run Setup.exe and install the software

USB Low-Level Format 2023

USB Low-Level Format


This article shows you how to download and install the full version of USB Low-Level Format v5.01 for free on a PC. Follow the direct download link and instructions below for guidance on installing USB Low-Level Format v5.01 on your computer.

Table of contents

About the software

How to Download and Install USB Low-Level Format v5.01

Required files

About the software

Low-level formatting is a process of disk formatting operation that restores disk drive to its factory defaults. USB drive, USB flash drive, USB pen drive, and USB thumb are easy to use for data transfer, however, the various usages simultaneously lead to multiple issues. For instance, a USB flash pen drive may contain less capacity than its original state for unknown reasons; the flash device might have less capacity after it is cloned as a USB bootable drive from an ISO file. In other cases, the USB drive might lose capacity after it is formatted on yet a different device, such as a smart TV or a wireless router.

In case you experience constant data corruption, virus intrusion, invalid Master Boot Record, hidden partition, corrupted bootable sector, or bad sectors flags in USB storage device firmware/controller, the software can reliably revitalize your malfunctioning USB drive.

USB Low-Level Format is software that performs zero-fills for USB storage devices and simulate the finishing process as done in the factory. USB Low-level Format software clears all flags, all data, and all settings in USB drives. The software analyzes the possible settings for USB drive, figuring out the physical storage capacity, talking to the firmware/controller of your USB drive, and writing a zero byte to its each and every location on the drive. The process of low-level formatting is slow, as the software thoroughly and irreversibly erases all data from USB storage devices followed by restore USB drives to original state to find back the lost capacity and make them back to normal. The software can be used as a USB disk mass production tool to restore USB to factory default settings through low-level formatting, as it supports more than 20 USB drive controller brands, such as Intel, Samsung, Micron, Phison, SMI, Marvell, Toshiba, Silicon Motion, PMC, Sierra, OCZ, JMicron, Maxiotek, Goke, Greenliant, Fusion-io, Realtek, SanDisk, Western Digital, Hyperstone, Novachips, VIA, FADU.

In addition to low-level format capability, the software features more; it allows to create bootable USB drive for Windows installation, create bootable USB drive for MSDOS, FreeDOS, Unix, Linux, WinPE (Windows PE), and WinRE (Windows Recovery Environment). It offers 9 industrial-strength data wipe options that securely wipe data on USB drives. It supports initialization of USB drives of any capacity to popular file systems, such as NTFS, FAT32, FAT, and exFAT.

The main features of USB Low-Level Format are:

  • Format USB drives with corrupted partition tables and invalid sector size
  • Support new USB flash drives with SanDisk USB storage controllers
  • Much faster quick format operation
  • Fix a bug in calling FormatEx2() API on Windows 10 64-bit and 32-bit

USB Low-Level Format v5.01 System Requirements

  • Windows 11
  • Windows 10
  • Windows 8.1
  • Windows 8
  • Windows 7
  • Windows Vista
  • Windows XP
  • Windows 2000
  • Windows Server 2023/2023/2023/2012/2008/2003/2000

How to Download and Install USB Low-Level Format v5.01

  1. Click on the download button(s) below and finish downloading the required files. This might take from a few minutes to a few hours, depending on your download speed.
  2. Extract the downloaded files. If you don’t know how to extract, see this article. The password to extract will always be: QWERTY!
  3. Run Setup.exe and install the software

USB Device Tree Viewer 2023

USB Device Tree Viewer


This article shows you how to download and install the full version of USB Device Tree Viewer v3.8.1 for free on PC. Follow the direct download link and instructions below for guidance on installing USB Device Tree Viewer v3.8.1 on your computer.

Table of contents

  • About the software
  • USB Device Tree Viewer v3.8.1 System Requirements
  • How to Download and Install USB Device Tree Viewer v3.8.1
  • Required files

About the software

The USB Device Tree Viewer, short UsbTreeView, is based upon the Microsoft “USBView” sample application found in the Windows Driver Development Kits and is now standalone on GitHub.

But it is source code only, there is no executable for end users provided. Meanwhile USBView comes as executables as part of the “Debugging Tools für Windows”, see here: USBView. But still it is still more or less merely a demo application for the Windows USB API, after 20 years it still doesn’t even save the window position…

The main features of USB Device Tree Viewer are:

  • Window position is saved, yea
  • Informations from the Windows Device Management are collected and matched with the found USB devices; Therefore UsbTreeView can show the child devices, including drive letters and COM-ports
  • Background color and font of the right pane can be set (the font shown in the screenshots is DOSLike 7)
  • Keeps the tree item selection over refresh
  • TreeView highlighting of arrived and removed devices
  • Shows open handles on failed safe removal
  • Way more descriptors are decoded, as Audio 2.0
  • Hexdump of the descriptors can be shown
  • Safe removal, device restart and port restart
  • Extended USB information available under Windows 8 and 10 (taken from the latest USBView sample application)
  • Extended information about host controllers
  • Failed USB requests are re-tried in the background, e.g. if a USB mouse was moved while requesting its properties
  • Toolbar with jump-lists for easily finding devices in complex trees
  • TreeView with handmade 16×16 icons, USBView used 32×32 icons scaled down to 15×15

USB Device Tree Viewer v3.8.1 System Requirements

  •  Operating System:  Windows 10, Windows 8.1, Windows 7

How to Download and Install USB Device Tree Viewer v3.8.1

  1. Click on the download button(s) below and finish downloading the required files. This might take from a few minutes to a few hours, depending on your download speed.
  2. Extract the downloaded files. If you don’t know how to extract, see this article. The password to extract will always be: QWERTY!
  3. Run Setup.exe and install the software